20101031

SAR Global Gear For Sale 03NOV2010

SAR Gear for sale
Order info
Send me a email at spencer@sarglobaltool.com or sarglobaltool@gmail.com let me know what you may want, I always send a detailed quickbooks invoice for payment.
All items include PP, Shipping and Handling.
All items ship First class parcel ( if you want it faster let me know )
All items usually ship with-in 24 hours
All items shipped overseas will require a little extra to get it there.
I do accept Pay Pal, Postal MO and personal checks. Item will ship when funds are received

Thanks
SAR

The PBK ( PAck and Boat Knife )
Nothing special a real minimalist approach to mans oldest tool. Good utility blade for backpacking, kayak fishing, and survivalist needs. Not to big not to small, not to thick and not so thin etc etc lots of compromise. It should do well for many applications in the outdoor setting.


.125"x7.5" OAL with a 3.5" blade
HRc 59-60 on the cpm 154 and the ti has a carbidized enhanced edge
Low viz, low maintenance SAR tumble finish
Handle is drilled out balance point is dead center
Handle wrap is 2 part first layer is approximately 3" .038"
"Kevlar Thread— Has a breaking strength five times greater than steel wire. It also has excellent heat and flame resistance. Meets MIL-T-87128. Maximum temperature is 400° F. Color is yellow"
Over wrap is approximately 3' of 5/32" braided nylon that has zero stretch, very durable and made for the commercial fishing industry used as rigging line.
Butt end has a small pry/flat screwdriver.

All of these PBK's are of the first run and the first available for sale

PBK in Orange G10 $250.00 shipped SOLD




PBK wrapped $225.00 SOLD



PBK-R runt is a shorter version and is 6" long with a 2" blade $200.00 shipped on Hold



SAR 1911 TDT ( Take Down Tool ) $450.00 shipped
CPM 154 blade .160x4" stonewashed Recurved blade
Both both and lockface have been carbidized for long lasting wear
Textured and stonewashed .140 6L/4V Ti lock side and clip
Textured Black coarse peel G-10 with regular 1911 bushing wrench
5 1/2" Closed, 9 3/4" open
Ti disk (shell casing) with logo steel thumbstud (primer)
Removable cord wrapped lanyard. optional




SARclops Neck knife one is 6LA4V Titanium with a carbide edge in wharncliff grind, one is CPMD2 in a persian grind. Ti version SOLD. D2 is $200.00 shipped. For more selection you can visit my dealer Dan at Plaza Cutlery same price same great service Plaza Cutlery


SAR Slug in 6LA4V Titanium with carbide edge with carbon fiber handle $250.00 shipped. For more info on this and some other gear please check out Dan at Plaza Cutlery Plaza Cutlery



SAR Eclipse Signal System $15.00 each shipped over 200 hundred in stock and ready to go. Here is a You tube video of this device. SAR Eclipse Signal System Video



SAR Tac-Ti comb w/pocket clip 1"x4" 6LA4V MIL S. $100.00
SAR Beardy comb w/lanyard 1.5"x3.5" 6LA4V MIL S. $50.00



SAR Dead Ringer comb W/kydex sheath 1.7"x5.8" 1 1/4" hole 6LA4V Mil S. $100.00
SAR Hornet DF comb w/kydex sheath 1.3"x5.8" 6LA4V MIL S. $100.00

20101028

PBK for Halloween and the PBK-R ( Runt )

I decided to do a PBK with handle material, I had a choice between yellow and orange...the decision was easy Halloween=orange.


The pry tool detail with handle material worked out pretty good, still functions. Also did up the last of the prototypes, I am pretty happy with the way it performs so I will go forward with more.

CPM 154 HRc 59-60
All have a 3' wrap of Kevlar thread which is 5 times stronger than steel line
Zero stretch braided cord.

The "PBK-R" ( Runt ) will be a cool little back pocket blade, very sheeple friendly.
6" over all length with a pointy 2" blade

I will have some available next week if you may be interested let me know, I will try to keep the cord of the same color but it may changed.

Thanks and have a scary Halloween.....Please remember all those serving in the military to ensure our freedom!

SAR
















20101025

A quick update

Just wanted to mention that everything other than a few items from the September gear sale is sold out. I will get some stuff up here today or tomorrow.  I have a faster way to manufacturer my Signal gear so expect a nice little price drop...if I can build it faster and maintain the same quality I can charge less..right.

We spent the weekend up at a state park called "Hodges Garden" Website, we rented a cabin which sits on the lake. The kids had a blast running around the woods, kayaking, and fishing. I was stalking some monster carp with a spear I fashioned from a bamboo grove. I was unable to get as close for a clean shot...next time I will do it just a bit different...these carp are over 3-4' long....huge fish. Anyways we had a good time, also had a chance to test my new knife the PBK ( pack and boat knife ) it does really well in almost all areas except chopping it's to be expected with this design...has to be some tradeoff for the light weight.

Thanks
SAR








20101021

PBK

Pack and Boat knife


Nothing special a real minimalist approach to mans oldest tool. Good utility blade for backpacking, kayak fishing, and survivalist needs. Not to big not to small, not to thick and not so thin etc etc lots of compromise. It should do well for many application.
I made five in CPM 154 and one in 6LA4V ti
.125"x7.5" OAL with a 3.5" blade
HRc 59-60 on the cpm 154 and the ti has a carbidized enhanced edge
Low viz, low maintenance SAR tumble finish
Handle is drilled out balance point is dead center

Handle wrap is 2 part.
 first layer is approximately 3" .038" "Kevlar Thread— Has a breaking strength five times greater than steel wire. It also has excellent heat and flame resistance. Meets MIL-T-87128. Maximum temperature is 400° F. Color is yellow"
Under the Kevlar thread is 1 small 1 large stainless steel fishing hooks.
Over wrap is approximately 3' of 5/32" braided nylon that has zero stretch, very durable and made for the commercial fishing industry used as rigging line.
Butt end has a small pry/flat screwdriver.

I still have a few things to add to the sheath..fire starter, signal, pace and small compass via a SAR O'rig. We will be taking the kids camping this weekend and I plan to use the shit out of a few of these...tell ya how it goes next week.

Thanks
SAR









20101019

SAR Custom Knives website is gone

I am constructing a new webpage under SAR Global Tool, I hope to have it up soon. My old page was sorely outdated with some designs I rarley build ever if at all....times change


As of right now it will redirect you to my Blog site for the time being, it gets updated weekly sometimes daily so that is the place to be for whats current.

My mailing list under SAR custom knives is still intact and will be under my new mailer.

Thanks
SAR

20101011

Could not pass on this one

I was presented with a great deal on a rifle that I have been wanting for a long long time. Finally got a AK, a polish made AK-74 which shoots the lighter, faster, 5.45x39mm. Anyways I leave tomorrow for my journey back home with a few stops along the way. Really cannot wait to put this thing through the paces, I have a Aimpoint Comp M4 that will get mounted up soon.

If you get a chance please check out Bret at Grey Ghost Tactical Grey ghost web site he runs a really nice, clean shop with high end quality gear.

SAR


Getting it on!

That's what 8 of us did with Matt Graham of http://www.grahamcombat.com/. I am not going to post much until I look at my notes, all the footage and pictures. I will say that Matt teaches a course that will let you leave with a new skill, skills and mind set that can be applied in all aspects of shooting/defense.

Quick little video of the last day, breaking contact from a vehicle in buddy teams with multiple threats....awesome stuff. Also some footage of shooting through the front windows...would I have done it had I not trained for it nope, but you can bet your ass if I have a threat to my front and no choice but to engage through the window...hey no problem now..I know the end results and consideration of what needs to happen. This and many other aspects of basic shooting, maneuvers and combat mindset taught by Matt set the condition for a great block of instruction....Thanks Matt

More to follow when I get home.

Break contact from vehicle video

Break contact buddy team